You have no items in your shopping cart.
Subtotal: $0.00
Details
Specifications
| Weight | 17 3/4 lbs. |
|---|---|
| Length | 15 1/4" |
| Bore & Stroke | 1 1/8" x 3 3/4" |
| Impact Rate | 2280 blows/min. |
| Air Consumption | 33 cfm |
| Air Inlet Diameter | 3/8" NPT or 7/8-24 |
| Shipping Weight | 19 lbs. |
This unique design reduces handle breakage. The common problem of a threaded handle-to-barrel connection coming loose and damaging the handle and internal parts has been eliminated.
The strong “D” configuration is large enough to allow a comfortable, sure grip, even for a gloved hand.
Because of the Sullair chipping hammer’s unique design and materials, normal oil carry-over from the compressor, combined with moisture in the air, will usually provide sufficient lubrication under normal operating conditions.
The Sullair chipping hammer’s unique backhead design results in greater operator comfort.
Two air inlet bushings are furnished: 3/8" NPT and 7/8-24, internal thread. The bushings provide for versatile hose connections while protecting the handle inlet threads. 8' whip hoses with fittings optional.
Sullair provides a limited parts warranty of two years on the handle and cylinder, one year on all other parts except the retainer and retainer springs. In addition, should any other part wear out during normal operation, it is covered by Sullair’s exclusive chipping hammer warranty.
