You have no items in your shopping cart.
Subtotal: $0.00
Details
Handheld core drill motor with attractive design and functional ergonomics. Soft rear section and a larger contact area mean that it sits better against your body. The machine is modular, and therefore easy to maintain and repair.
- Handheld core drilling of up to 4"
- Elgard, when the machine is overloaded, the motor pulsates (rapid fluctuations in rpm). This occurs at a level just before the electronics cut the power to the motor.
- Functional ergonomics make the Husqvarna drill motors easy and convenient to operate.
- Softstart, an electronic current limiter, for softer starts. Full speed is reached about a second after the switch is turned on.
- Water-cooled gearbox (patent pending), where the water passes through the blade spindle, extends life of gearbox and gaskets.
- Standard attachment for the stand, and is mainly meant for wet drilling, but can be fitted with an adapter for dry drilling.
- Buttons and controls are ergonomically designed and easy to reach.
- Water hose and electric cable run parallel conveniently from the machine.
- Thanks to electronic rpm control, the job can always be done with optimum power.
| Engine | |
|---|---|
| Motor | 1 phase, electric |
| Voltage | 230 / 110 V |
| Amperage | 8 / 16 A |
| Power | 1850 W |
| Output RPM | 700 / 1700 / 3600 rpm |
| Output RPM at full load | 580 / 1400 / 2900 rpm |
| Power rating | 1100 W |
| Speeds | 3 |
| Water coupling | G 1/4" |
| Drill bit | |
| Max drill bit diameter, handheld | 3 inch |
| Max drill bit diameter, stand | 6 inch |
| Mounting collar | 2.36 " |
| Spindle thread, outer | 1 1/4" 7 UNC |
| Spindle thread, inner | G 1/2" or 5/8" 11 UNC |
| Dimensions | |
| Weight | 15.6 lbs |
| Sound and noise | |
| Sound pressure | 90 dB(A) |
| Sound level | 94 dB(A) |
