Wacker PG2A 2 inch Dewatering Pump

Centrifugal dewatering pumps are the value alternative for keeping jobsites dry

Wacker Neuson's PG dewatering pump series has been designed to handle the removal of relatively clean jobsite water. With its self-priming centrifugal pumping action and overall compact size, the pump is ideal for the contractor with the need for temporary water removal.

	Cast iron impeller and volute are wear resistant for long life and minimal service.
	Pump out vanes on back of impeller reduce debris accumulation and downtime while allowing greater productivity.
	Carbon ceramic mechanical seal teamed with reliable four-cycle engine with low oil shutdown provides for increased operating life.
	High strength lightweight diecast aluminum housing increases the years of trouble-free pump life. A heavy-duty protective frame provides convenient carry handles while adding extra protection for the pump.
	Self-priming high performance pump capable of handling solids up to .25 inch (6,5mm), ideal for jobsites with relatively clean waters. Technical Data – PG 2A   Description Metric Imperial Suction & discharge diameter 50 mm 2 in Length x width x height 480 x 375 x 395 mm 19 x 15 x 15.5 in Operating weight 24 kg 53 lb Shipping weight (including packaging) 26 kg 57 lb Shipping size 505 x 400 x 425 mm 20 x 16 x 17 in Max. head 30 m 98 ft Max. discharge 600 l/min 159 US gpm Max. suction lift 7,5 m 25 ft Solid size capacity 6,5 mm .25 in Engine Type air-cooled, 4-cycle, single cylinder, gasoline engine Honda Displacement 118 cm3 7.2 in3 Max. Rated Power at Rated Speed* 2.6 kW at 3600 rpm 3.5 hp at 3600 rpm Power Rating Specification SAE J1349 Fuel tank capacity 2,5 l 2.6 US qt Fuel consumption 1,3 l/h 1.4 US qt/h

Related product(s)

2" x 20' Suction Hose Coupled Male x Quick Connect $65.00

2" Strainer $16.00

2" Quick Connect Cam Lock with Female Threads $13.95

2" x 50' Discharge Hose Coupled M X F $44.75